Sign In | Join Free | My himfr.com
Home > Hollow Fiber MBR >

0.05um PVDF Hollow Fiber MBR Sludge Treatment Hollow Fiber Membrane Module

Hangzhou Kaihong Membrane Technology Co., Ltd.
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now
    Buy cheap 0.05um PVDF Hollow Fiber MBR Sludge Treatment Hollow Fiber Membrane Module from wholesalers
     
    Buy cheap 0.05um PVDF Hollow Fiber MBR Sludge Treatment Hollow Fiber Membrane Module from wholesalers
    • Buy cheap 0.05um PVDF Hollow Fiber MBR Sludge Treatment Hollow Fiber Membrane Module from wholesalers
    • Buy cheap 0.05um PVDF Hollow Fiber MBR Sludge Treatment Hollow Fiber Membrane Module from wholesalers

    0.05um PVDF Hollow Fiber MBR Sludge Treatment Hollow Fiber Membrane Module

    Ask Lasest Price
    Brand Name : CNKHONG
    Model Number : KH-MBR-35-Co-PVDF
    Price : USD14/M2
    Payment Terms : L/C, T/T
    Supply Ability : 1200M2/day
    Delivery Time : within 10 days
    • Product Details
    • Company Profile

    0.05um PVDF Hollow Fiber MBR Sludge Treatment Hollow Fiber Membrane Module

    Pore Size 0.05um MBR Membrane Elements for Sludge Treatment with PVDF material


    Membrane bioreactor(MBR) is the new wastewater treatment system that the organic combination of membrane separation technology and biological treatment technology.Using the membrane separation equipment entrap activated sludge and solid in aerobic tank.Therefore the concentration of activated sludge (MLSS) and sludge age (SRT) will increase 2 ~ 4 times in the system, the relative hydraulic retention time(HRT) can be greatly reduced, large particles and difficult to degrade in the process tank can also be continuous reaction and degradation, so the membrane bioreactor by membrane separation technology to strengthen the biological response function.MBR system has been developed in the recent twenty years, with the improvement of membrane manufacturing technology and the accumulated experience of our companys long-term application , MBR process has become a very mature technology and will attract worldwide attention in the environmental protection industry.

    Advantages of membrane bioreactor (MBR)
    •Microbe concentration can increase 2 ~ 4 times, biochemical efficiency increased by 20 ~ 40%;
    •Shorten the hydraulic retention time, extend the sludge (organic macromolecules colloidal particles) residence time;
    •The secondary sedimentation tank (sst) can be removed;
    •Water pure and transparent ;
    •Sludge cleaning cycle is long;
    •Simple operation can be automatically controlled;
    •The service life of hollow fiber membrane can reach more than 3 years

    Item/ModelKH-MBR-25-CO-PVDFKH-MBR-30-CO-PVDFKH-MBR-35-CO-PVDF
    Membrane Area(M2)253035
    Height1560 mm1810 mm1810 mm
    Width1040 mm1040 mm1250 mm
    Thickness47 mm47mm35 mm
    Dry Weight20 kgs25 kgs30 kgs
    Membrane materialReinforced PVDFReinforced PVDFReinforced PVDF
    Micro pore size0.05μm0.05μm0.05μm
    ID/OD of Membrane0.9/2.2mm0.9/2.2mm0.9/2.2mm
    Suspend solid<5mg/L<5mg/L<5mg/L
    Temperature5-40℃5-40℃5-40℃
    PH range2~112~112~11
    Flux for waste water15~20 LMH15~20 LMH15~20 LMH
    Operating MethodSucking out 8 mins and staying 2 minsSucking out 8 mins and staying 2 mins

    Sucking out 8 mins

    and staying 2 mins

    Cleaning Chemicals500-3000ppm Sodium Hypochlorite

    500-3000ppm

    Sodium Hypochlorite

    500-3000ppm

    Sodium hypochlorite


    Hydrophilic treatment and operation mode of the MBR membrane element
    If the customers buy the hydrophobic MBR membrane element, for hydrophilic treatment before using, treatment method is using the 95% of the industrial alcohol to immerse about 15 minutes, and then rinse with water . If not use immediately after the hydrophilic, should be sealed packaging to keep membrane wet.
    Prevent to block the membrane hole and cleaning
    Through the aeration system to produce bubbles and water flow, to make the membrane silks shake and clean. At the same time ,using the intermittent operation mode,, can prevent membrane pore to block, and its possible that the system has the long-term stable operation.When the system is operating, keeping stable flow, by the pressure gauge to read operation pressure,working negative pressure -0.01 ~ -0.05MPa,when the operating pressure is more than -0.05MPa, need to clean the MBR membrane element.
    Quality 0.05um PVDF Hollow Fiber MBR Sludge Treatment Hollow Fiber Membrane Module for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Hangzhou Kaihong Membrane Technology Co., Ltd.
    *Subject:
    *Message:
    Characters Remaining: (0/3000)